I-SWD8032 i-solvent yamahhala ye-polyaspartic anticorrosion coating
Izici nezinzuzo
* okuqinile okuphezulu, ukuminyana okuphansi, nokulingana okuhle, ifilimu yokumboza iqinile, iminyene, ikhanya egcwele
* Amandla amahle kakhulu okunamathela, ahambisana kahle ne-polyurethane, i-epoxy nezinye izinto.
* ubulukhuni obuphezulu, ukumelana kahle nokuklwebheka kanye nokumelana namabala
* ukumelana okuhle kakhulu kwe-abrasion kanye nokumelana nomthelela
* Impahla enhle kakhulu ye-anticorrosion, ukumelana ne-asidi, i-alkali, usawoti kanye nabanye.
* akukho okuphuzi, akukho ukushintsha kombala, akukho pulverization, anti-ukuguga, inokumelana nesimo sezulu esihle kakhulu nokugcinwa kokukhanya nombala.
* ingasetshenziswa njengejazi elingaphezulu eliqondise endaweni yensimbi (DTM)
* lo mkhiqizo awuhambisani nemvelo futhi awunazo izinyibilikisi ze-benzene nezinhlanganisela zomthofu.
* ingasetshenziswa ekushiseni okuphansi kwe- -10 ℃, ukugqoka kuminyene, ukwelashwa okusheshayo.
Ulwazi lomkhiqizo
| Into | Ingxenye | B ingxenye |
| Ukubukeka | uketshezi oluphuzi olukhanyayo | Umbala ungalungiseka |
| Amandla adonsela phansi athize(g/m³) | 1.05 | 1.60 |
| I-Viscosity (cps)@25℃ | 600-1000 | 800-1500 |
| Okuqukethwe okuqinile (%) | 98 | 97 |
| Isilinganiso sokuhlanganisa (ngesisindo) | 1 | 2 |
| Isikhathi esomile ebusweni (h) | 0.5 | |
| Impilo yebhodwe h (25℃) | 0.5 | |
| Ukufakwa kwethiyori (DFT) | 0.15kg/㎡ ukujiya kwefilimu 100μm | |
Izici ezibonakalayo ezijwayelekile
| Into | Izinga lokuhlola | Imiphumela |
| Ukuqina kwepensela | 2H | |
| Amandla okunamathela (Mpa) isisekelo sensimbi | HG/T 3831-2006 | 9.3 |
| Amandla okunamathela (Mpa) isisekelo sikakhonkolo | HG/T 3831-2006 | 3.2 |
| Ukungakwazi ukungena emanzini | 2.1Mpa | |
| Ukuhlola ukugoba (i-cylindrical axis) | ≤1mm | |
| Ukumelana ne-Abrasion (750g / 500r) mg | HG/T 3831-2006 | 12 |
| Ukumelana nomthelela kg·cm | I-GB/T 1732 | 50 |
| Anti-ukuguga, ukuguga okusheshayo 2000h | I-GB/T14522-1993 | Ukulahleka kokukhanya ＜1, chalking ＜1 |
